5123导航取五湖之利取四-欢迎莅临

职称:教授

个人简介

男,1968年生。分别于1990年7月,1991年7月和1995年3月,在清华大学工程力学系获工学学士、硕士和博士学位。1995年6月-1997年6月,在清华大学核能技术设计研究院做博士后。1997年9月-1999年4月,获联邦德国洪堡奖学金,在Darmstadt 工业大学力学研究所和荷兰Delft工业大学任洪堡研究员。1999年5月-2001年7月, 在清华大学工程力学系任副教授。2001年8月-至今,在清华大学工程力学系任教授。

现任清华大学工程力学系生物力学与医学工程研究所所长、中国力学学会秘书长、《 Engineering Fracture Mechanics 》、《 Acta Mechanica Sinica 》、《Archive of Applied Mechanics》、《International Journal of Applied Mechanics》、《Molecular and Cellular Biomechanics》、《 Multidiscipline Modeling in Materials and Structures 》、《固体力学学报》(中英文版)、《应用力学学报》等期刊编委。

主要从事固体力学和生物力学的研究工作,包括微纳米力学、生物材料力学与仿生、细胞力学、细观损伤与断裂力学等方面。已发表专著2部,SCI论文160余篇。曾获全国优秀博士学位论文奖(1999)、教育部跨世纪优秀人才基金(2000)、霍英东教育基金会第九届高等院校青年教师研究基金 (一等,2004) 、国家杰出青年科学基金(2005)、清华大学优秀青年教师奖(2005)、第十届中国青年科技奖(2007)、中国高校自然科学一等奖(2008)等奖励。

教育背景

1985.9-1990.7 在清华大学工程力学系读本科,获工学学士学位;

1990.9-1991.7 在清华大学工程力学系读硕士,获工学硕士学位;

1991.9-1995.3 在清华大学工程力学系读博士,获工学博士学位;


工作履历

1995.6-1997.7 在清华大学核能技术设计研究院,做博士后;

1997.9-1998.12 获联邦德国洪堡奖学金,在Darmstadt工业大学力学研究所任洪堡研究员;

1999.1-1999.4 获联邦德国洪堡奖学金,在荷兰Delft工业大学任洪堡研究员;

1999.5-2001.7 在清华大学工程力学系,任副教授;

2001.1-2001.4 在澳大利亚悉尼大学先进材料技术中心,任访问学者;

2001.8-至今 在清华大学工程力学系,任教授;2002年4月起,任博士生导师;

2001.12-2002.3 在美国伊利诺依大学厄尔巴纳-尚佩恩分校(UIUC)访问研究;

2002.9-2002.10 在德国马克斯•普朗克金属研究所访问研究;

2004.8-2005.2 在香港科技大学机械工程系访问研究;

2006.7-2006.8 在澳大利亚悉尼大学先进材料技术中心,任访问教授;

学术兼职

2002.11-2006.11 任中国力学学会第七届理事会副秘书长

2004.1-至今 任《固体力学学报》和《Acta Mechanica Solida Sinica》编委。

2004.7-至今 任期刊《Multidiscipline Modeling in Materials and Structures》编委

2005.1-至今 任北京市生物医学工程学会生物力学专业委员会委员

2005.2-至今 任国际期刊《Engineering Fracture Mechanics》编委和中国地区副主编

2006.4-2011.3 教育部高等学校教学指导委员会委员

2006.10-至今 任中国力学学会常务理事

2007.10-至今 任期刊《Acta Mechanica Sinica》编委

2007.6-2011.5 任中国力学学会第六届青年工作委员会主任委员

2008.7-至今 任期刊《Archive of Applied Mechanics》编委

2011.01-至今 任期刊《International Journal of Applied Mechanics》编委

2010.01-至今 任期刊《应用力学学报》编委

2010-2014 国家自然科学基金委数理学部力学学科评审组成员

2010.01-至今 任期刊《Molecular and Cellular Biomechanics》编委

2010.10-2014.9 任中国力学学会第九届理事会秘书长

研究领域

1.生物材料力学

2.微纳米力学

3.细胞力学

4.损伤与断裂力学

研究概况

主要从事固体力学和生物力学的研究工作,包括微纳米力学、生物材料力学与仿生、细胞力学、细观损伤与断裂力学等方面。已发表专著2部,SCI论文160余篇。

奖励与荣誉

1.“岩体宏细观损伤力学研究”获中国岩石力学与工程学会自然科学奖特等奖(2010)

2.第十届中国力学学会青年科技奖(2009)

3.第11批长江学者特聘教授(2008)

4.“准脆性材料的宏细观损伤力学研究”获中国高校自然科学一等奖(2008)

5.Endeavour Executive Award of Australia (2008)

6.第十届中国青年科技奖(2007)

7.国家自然科学基金委员会杰出青年科学基金(2005)

8.霍英东教育基金会第九届高等院校青年教师基金(2003)

9.全国优秀博士学位论文奖(1999)

10.教育部跨世纪优秀人才基金(2000)

11.“准脆性材料的微裂纹扩展区损伤理论”获中国高校自然科学二等奖(2000)

12.联邦德国洪堡奖学金(1997–1999)

学术成果

论文发表目录

1. S. W. Yu and X. Q. Feng, Damage Mechanics, Tsinghua University Press, Beijing, 1997, (in Chinese).

2. X. Q. Feng and S. W. Yu, Damage Micromechanics of Quasi-Brittle Solids, Higher Education Press, Beijing, 2002, (in Chinese).

3. Bo Li, Yan-Ping Cao, and Xi-Qiao Feng. Growth and surface folding of esophageal mucosa: A biomechanical model. Journal of Biomechanics, 2011, Vol. 44, No. 1, pp. 182–188. (DOI: 10.1016/j.jbiomech.2010.09.007)

4. Yuan-Tong Gu, W. Wang, L. C. Zhang, and Xi-Qiao Feng. An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields. Engineering Fracture Mechanics, 2011, Vol. 78, No. 1, pp. 175–190. (DOI: 10.1016/j.engfracmech.2010.10. 014)

5. Bing-Wei Li, Hong-Ping Zhao, and Xi-Qiao Feng. Static and dynamic mechanical properties of cattle horns, Materials Science and Engineering C - Biomimetic and Supramolecular Systems, 2007, Vol. 31, No. 2, pp. 179–183. (DOI: 10.1016/j.msec. 2010.08.016)

6. G. K. Xu, X. Q. Feng, and Y. Li, Self-assembled nanostructures of homopolymer and diblock copolymer blends in a selective solvent, Journal of Physical Chemistry B, 2010, Vol. 114, No. 3, pp. 1257–1263. (DOI: 10.1021/jp908823h)

7. G. K. Xu, X. Q. Feng, and S. W. Yu, Controllable nanostructural transitions in grafted nanoparticle-block copolymer composites, Nano Research, 2010, Vol. 3, No. 5, pp. 356–362. (DOI: 10.1007/s12274-010-1039-8)

8. Hai-Mu Ye, Jian-Shan Wang, Shuo Tang, Jun Xu, Xi-Qiao Feng, Bao-Hua Guo, Xu-Ming Xie, Jian-Jun Zhou, Lin Li, Qiong Wu and Guo-Qiang Chen. Surface stress effects on the bending direction and twisting chirality of lamellar crystals of chiral polymer, Macromolecules, 2010, Vol. 43, No. 13, pp. 5762–3770. (DOI: 10.1021/ma100920u)

9. X. Q. Feng, X. Y. Wang, Y. F. Shi, S. W. Yu and Q. Yang, Dislocation-based semi-analytical method for calculating stress intensity factors of cracks: Two-dimensional cases. Engineering Fracture Mechanics, 2010, Vol. 77, No. 18, pp. 3521–3531. (DOI: 10.1016/j.engfracmech.2010.03.004)

10. X. Q. Feng and S. W. Yu, Damage micromechanics for constitutive relations and failure of microcracked quasi-brittle materials, International Journal of Damage Mechanics, 2010, Vol. 19, No. 1, pp. 1–17. (DOI: 10.1177/1056789509359662)

11. Y. Li, X. Q. Feng, Y. P. Cao, and H. Gao, Constructing tensegrity structures from one-bar elementary cells, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010, Vol. 466, No. 1, pp. 45–61. (DOI: 10.1098/rspa.2009. 0260)

12. Y. Li, X. Q. Feng, Y. P. Cao and H. Gao, A Monte Carlo form-finding method for large scale regular and irregular tensegrity structures, International Journal of Solids and Structures, 2009, Vol. 47, No. 14–15, pp. 1888–1898. (DOI: 10.1016/j.ijsolstr.2010. 03.026)

13. Xi-Qiao Feng, Yue Li, Yan-Ping Cao, and Y. T. Gu, Design methods of rhombic tensegrity structures, Acta Mechanica Sinica, 2010, Acta Mechanica Sinica, 2010, Vol. 26, No. 4, pp. 559–565. (DOI: 10.1007/s10409-010-0351-6)

14. Y. Li, G. K. Xu, B. Li, X. Q. Feng, A molecular mechanisms-based biophysical model for two-phase cell spreading ? Applied Physics Letters, 2010, Vol. 96, No. 4, pp. 043703 (1–3). (DOI: 10.1063/1.3298361)

15. B. W. Li, H. P. Zhao, X. Q. Feng, W. W. Guo, and S. C. Shan, Experimental study on the mechanical properties of the horn sheaths from cattle, Journal of Experimental Biology, Vol. 213, No. 3, pp. 479–486. (DOI: 10.1242/jeb.035428)

16. X. Y. Ji, Y. P. Cao, and X. Q. Feng, Micromechanics prediction of the effective elastic moduli of graphene sheet-reinforced polymer nanocomposites Modelling and Simulation in Materials Science and Engineering, 2010, Vol. 18, No. 4, pp. 045005 (1–16). (DOI: 10.1088/0965-0393/18/4/045005)

17. R. Xia, J. L. Wang, R. Y. Wang, X. D. Li, X. Zhang, X. Q. Feng, Y. Ding, Correlation of thermal and electrical conductivities of nanoporous gold. Nanotechnology, 2010, Vol. 21, No. 8, pp. 085703(1–5). (DOI: 10.1088/0957-4484/21/8/085703)

18. X. P. Zheng, Y. P. Cao, B. Li, X. Q. Feng, and G. F. Wang, Surface effects in various bending-based test methods for measuring the elastic property of nanowires, Nanotechnology, 2010, Vol. 21, No. 20, pp. 205702 (1–6). (DOI: 10.1088/0957- 4484/21/20/205702)

19. X. P. Zheng, Y. P. Cao, B. Li, and X. Q. Feng, Surface wrinkling of nanostructured thin films on a soft substrate, Computational Materials Science, 2010, Vol. 49, No. 4, pp. 767–772. (DOI: 10.1016/j.commatsci.2010.06.020)

20. Fei Jia, Xiu-Peng Zheng, Yan-Ping Cao, and Xi-Qiao Feng, Theoretical study on the bilayer buckling technique for thin film metrology. CMC: Computers, Materials & Continua, 2010, Vol. 18, No. 2, pp. 105–120.

21. G. F. Wang and X. Q. Feng, Surface effects on the vibration and buckling of piezoelectric nanowires, EPL (Europhysics Letters), 2010, Vol. 91, No. 5, pp. 56007(1–4). (DOI: 10.1209/0295-5075/91/56007)

22. J. S. Wang, Y. H. Cui, X. Q. Feng, G. F. Wang, and Q. H. Qin. Surface effects on the elasticity of nanosprings. EPL (Europhysics Letters), 2010, Vol. 92, No. 1, pp. 16002(1–6). (DOI: 10.1209/0295-5075/92/16002)

23. X. L. Fu, G. F. Wang and X. Q. Feng, Surface effects on mode-I crack tip fields: A numerical study, Engineering Fracture Mechanics, 2010, Vol. 77, No. 7, pp. 1048– 1057. (DOI: 10.1016/j.engfracmech.2010.02.022)

24. B. Li, S. Q. Huang, and X. Q. Feng, Buckling and post-buckling of a compressed thin film bonded on a soft elastic substrate: A three-dimensional analysis, Archive of Applied Mechanics, 2010, Vol. 80, No. 2, pp. 175–188. (DOI: 10.1007/s00419-009- 0313-2)

25. Y. P. Cao, X. Y. Ji and X. Q. Feng, Geometry independence of the normalized relaxation functions of viscoelastic materials in indentation, Philosophical Magazine, 2010, Vol. 90, No. 12, pp. 1639–1655. (DOI: 10.1080/14786430903439826)

26. L. T. Gao, Y. Liu, Q. H. Qin, and X. Q. Feng, Morphology stability analysis of vesicles in an electric field, Acta Mechanica Sinica, 2010, Vol. 26, No. 1, pp. 5–11. (DOI: 10.1007/s10409-009-0295-x)

27. G. K. Xu, Y. Li, B. Li, X. Q. Feng, and H. Gao, Self-assembled lipid nanostructures encapsulating nanoparticles in aqueous solution, Soft Matter, 2009, Vol. 5, No. 20, pp. 3977–3983. (DOI: 10.1039/b906918f)

28. L. T. Gao, X. Q. Feng, and H. Gao, A phase field method for simulating morphological evolution of vesicles in electric fields, Journal of Computational Physics, 2009, Vol. 228, No. 11, pp. 4162–4181 (DOI: 10.1016/j.jcp.2009.02.034)

29. X. Q. Feng, R. Xia, X. D. Li, and B. Li, Surface effects on the effective Young’s modulus of nanoporous materials, Applied Physics Letters, 2009, Vol. 94, No. 1, pp. 011916 (1–3). (DOI: 10.1063/1.3067999)

30. G. F. Wang and X. Q. Feng, Surface effects on buckling of nanowires under uniaxial compression, Applied Physics Letters, 2009, Vol. 94, No. 14, pp. 141913 (1–3). (DOI: 10.1063/1.3117505) B. Li, X. Q. Feng, Y. Li and G. F. Wang, Morphological instability of spherical soft particles induced by surface charges, Applied Physics Letters, 2009, Vol. 95, No. 1, pp. 021903 (1–3). (DOI: 10.1063/1.3177189)

31. G. K. Xu, X. Q. Feng?, H. P. Zhao, B. Li, Theoretical study on the competition between cell-cell and cell-matrix adhesions, Physical Review E, 2009, Vol. 80, No. 1, pp. 011921.

32. X. Q. Feng, H. Li and S. W. Yu, Numerical simulations of the normal impact of adhesive microspheres with a substrate, Powder Technology, 2009, Vol. 189, No. 1, pp. 34–41. (DOI: 10.1016/j.powtec.2008.05.014)

33. Y. P. Cao, X. P. Zheng, B. Li and X. Q. Feng, Determination of the elastic modulus of micro- and nanowires/tubes using a buckling-based metrology, Scripta Materialia, 2009, Vol. 61, No. 11, pp. 1044–1047 (DOI:10.1016/j.scriptamat.2009.08.023)

34. X. P. Zheng, Y. P. Cao, B. Li, X. Q. Feng, H. Jiang and Y. G. Huang. Determining the elastic modulus of thin films using a buckling-based method: Computational study, Journal of Physics D: Applied Physics, 2009, Vol. 42, No. 17, pp. 175506(1–7). (DOI: 10.1088/0022-3727/42/17/175506).

35. X. H. Pan, S. Q. Huang, S. W. Yu and X. Q. Feng, Interfacial slippage effect on the surface instability of a thin elastic film under van der Waals force. Journal of Physics D: Applied Physics, 2009, Vol. 42, No. 5, pp. 055302(1–8). (DOI: 10.1088/0022- 3727/42/5/055302)

36. G. F. Wang and X. Q. Feng, Timoshenko beam model for buckling and vibration of nanowires with surface effects, Journal of Physics D: Applied Physics, 2009, Vol. 42, No. 15, pp. 155411(1–5). (DOI: 10.1088/0022-3727/42/15/155411)

37. R. Xia, C. X. Xu, W. W. Wu, X. D. Li, X. Q. Feng, and Y. Ding. Microtensile tests of mechanical properties of nanoporous Au thin films, Journal of Materials Science, 2009, Vol. 44, No. 17, pp. 4728–4733 (DOI: 10.1007/s10853-009-3731-1)

38. B. Li, Y. Li, G. K. Xu and X. Q. Feng, Surface patterning of soft polymer film-coated cylinders via an electric field, Journal of Physics: Condensed Matters, 2009, Vol. 21, No. 44, pp. 445006(1–8). (DOI: 10.1088/0953-8984/21/44/445006)

39. Q. S. Zheng, Y. Yu and X. Q. Feng, The role of adaptive-deformation of water strider leg in its walking on water. Journal of Adhesion Science and Technology, 2009, Vol. 23, No. 3, pp. 493–501. (DOI: 10.1163/156856108X379155)

40. S. W. Yu, L. P. Zhang and X. Q. Feng, Thermal effects of ferroelectric/magnetic materials under cyclic-electric loading, Journal of Thermal Stresses, 2009, Vol. 32, No. 1–2, pp. 149–164. (DOI: 10.1080/01495730802540866)

41. M. X. Shi, Q.M. Li, B. Liu, X.Q. Feng, and Y. Huang, Atomic-scale finite element analysis of mode transformation in carbon nanorings and single-walled carbon nanotubes, International Journal of Solids and Structures, 2009, Vol. 46, No. 25–26, pp. 4342–4360. (DOI: 10.1016/j.ijsolstr.2009.08.024)

42. B. Gu, H. Y. Liu, Y. W. Mai, X. Q. Feng and S. W. Yu, Fracture mechanics analysis on Smart-Cut(R) technology. Part 1: Effects of stiffening wafer and defect interaction, Acta Mechanica Sinica, 2009, Vol. 25, No. 1, pp. 73–81. (DOI: 10.1007/s10409-008 -0192-8)

43. B. Gu, H. Y. Liu, Y. W. Mai, X. Q. Feng and S. W. Yu, Fracture mechanics analysis on Smart-Cut(R) technology. Part 2: Effects of bonding flaws, Acta Mechanica Sinica, 2009, Vol. 25, No. 2, pp. 197–203. (DOI 10.1007/s10409-008-0193-7)

44. L. T. Gao, X. Q. Feng, Y. J. Yin, H. Gao, An electromechanical liquid crystal model of vesicles, Journal of the Mechanics and Physics of Solids, 2008, Vol. 56, No. 9, pp. 2844–2862.

45. X. Q. Feng, L. M. Qian, W. Y. Yan and Q. P. Sun, Wearless scratch of shape memory alloys due to phase transformational shakedown, Applied Physics Letters, 2008, Vol. 92, No. 12, pp. 121909(1–3).

46. J. S. Wang, X. Q. Feng, G. F. Wang and S. W. Yu, Twisting of nanowires induced by anisotropic surface stresses, Applied Physics Letters, 2008, Vol. 92, No. 19, pp. 191901(1–3).

47. S. Y. Fu, X. Q. Feng, Y. W. Mai and B. Lauke, Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate polymer composites, Composites Part B: Engineering, 2008, Vol. 39, No. 6, pp. 933-961.

48. Z. Qin, J. Zou and X. Q. Feng, Influence of water on the frequency of carbon nanotube oscillators, Journal of Computational and Theoretical Nanoscience, 2008, Vol. 5, No. 7, pp. 1403–1407. [Cover story].

49. Z. Qin, X. Q. Feng, J. Zou, Y. J. Yin, Molecular dynamics simulations of deformation and rupture of super carbon nanotubes under tension, Journal of Nanoscience and Nanotechnology, 2008, Vol. 8, No. 12, pp. 6274–6282.

50. S. Q. Huang, B. Li, and X. Q. Feng, Three-dimensional analysis of spontaneous surface of thin soft films. Journal of Applied Physics, 2008, Vol. 103, No. 8, pp. 083501(1–8).

51. J. Q. Zhang, S. W. Yu, X. Q. Feng and G. F. Wang, Theoretical analysis of adsorption-induced microcantilever bending. Journal of Applied Physics, 2008, Vol. 103, No. 9, pp. 093506(1–6).

52. X. P. Zheng, H. P. Zhao, L. T. Gao, J. L. Liu, S. W. Yu, and X. Q. Feng, Elasticity-driven droplet movement on a microbeam with gradient stiffness: A biomimetic self-propelling mechanism. Journal of Colloid and Interface Science, 2008, Vol. 323, No. 1, pp. 133–140.

53. G. F. Wang, X. Q. Feng, T. J. Wang and W. Gao, Effects of surface elasticity on the stress distributions in the vicinity of a crack tip, Journal of Applied Mechanics, 2008, Vol. 75, No. 1, pp. 011001(1–5). (DOI: 10.1115/1.2712233)

54. X. L. Fu, G. F. Wang,? and X. Q. Feng, Surface effects on the near-tip stress fields of a mode-II crack, International Journal of Fracture, 2008, Vol. 151, No. 2, pp. 95–106.

55. Z. Qin, Q. H. Qin and X. Q. Feng, Mechanical properties of carbon nanotubes with intramolecular junctions: Molecular dynamics simulations, Physics Letter A, 2008, Vol. 372, No. 44, pp. 6661–6666.

56. S. Q. Huang, H. P. Zhao, X. Q. Feng, W. Z. Cui, Z. G. Lin, Mechanical properties of cocoons constructed consecutively by a single silkworm caterpillar, Bombyx mori, Acta Mechanica Sinica, 2008, Vol. 24, No. 2, pp. 151–160.

57. S. Q. Huang and X. Q. Feng, Spinodal surface instability of soft elastic thin films, Acta Mechanica Sinica, 2008, Vol. 24, No. 3, pp. 289–296.

58. J. Q. Zhang, S. W. Yu and X. Q. Feng, Theoretical analysis of resonance frequency change induced by adsorption, Journal of Physics D: Applied Physics, 2008, Vol. 41, No. 12, pp. 125306(1–8).

59. H. M. Xu, X. F. Yao, X. Q. Feng and H. Y. Yeh, Dynamic stress intensity factors of a semi-infinite crack in an orthotropic functionally graded material, Mechanics of Materials, 2008, Vol. 40, No. 1–2, pp. 37–47.

60. H. M. Xu, X. F. Yao, X. Q. Feng, H. Y. Yeh, The behavior of a functionally graded orthotropic half-space under line loads, Composites Science and Technology, 2008, Vol. 68, No. 1, pp. 27–34.

61. W. G. Jiang, X. Q. Feng and C. W. Nan, A three-dimensional analytical method for estimating the thermal residual stresses in micro multilayer ceramic capacitors, Composites Science and Technology, 2008, Vol. 68, No. 3–4, pp. 692–698.

62. W. G. Jiang, X. Q. Feng and C. W. Nan, Influences of residual thermal stresses and geometric parameters on field distribution in multilayer ceramic capacitors under electric bias, Journal of Physics D: Applied Physics, 2008, Vol. 41, No. 13, pp. 135310(1–6).

63. W. G. Jiang, J. J. Su and X. Q. Feng, Effect of surface roughness on nanoindentation test of thin films, Engineering Fracture Mechanics, 2008, Vol. 75, No. 17, pp. 4965–4972.

64. B. Gu, H. Y. Liu, Y. W. Mai, X. Q. Feng and S. W. Yu, Fracture mechanics analysis of the effects of temperature and material mismatch on the Smart-Cut® technology, Engineering Fracture Mechanics, 2008, Vol. 75, No. 17, pp. 4996–5006.

65. T. Y. Zhang, B. Wang and X. Q. Feng and S. W. Yu, Preface on the special issue of the Eighth International Conference on Fundamentals of Fracture, Engineering Fracture Mechanics, 2008, Vol. 75, No. 17, pp. 2849–4851.

66. J. Q. Zhang, X. H. Pan, S. W. Yu and X. Q. Feng, Elastic analysis of physisorption- induced substrate deformation. Chinese Physics Letters, 2008, Vol. 25, No. 1, pp. 205–208.

67. H. P. Zhao, J. T. Zhu, X. Q. Feng, Z. Y. Fu, Y. Shao, R. T. Ma, Plasma surface graft of acrylic acid and biodegradation of poly(butylene succinate) films. Thin Solid Films, 2008, Vol. 516, No. 16, pp. 5660–5664.

68. F. Shi, J. Niu, J. L. Liu, Z. Q. Wang, X. Q. Feng and X. Zhang, Towards understanding why superhydrophobic coating is needed by water striders, Advanced Materials, 2007, Vol. 19, No. 17, pp. 2257–2261.

69. G. Chen, H. P. Zhao, S. H. Ji, X. Q. Feng, H. J. Shi, Experimental study of the effects of surface defects on rolling contact fatigue behavior, Key Engineering Materials, 2007, Vol. 353–358, pp. 254–257.

70. G. F. Wang and X. Q. Feng, Effects of surface elasticity and residual surface tension on the natural frequency of microbeams, Applied Physics Letters, 2007, Vol. 90, No. 23, pp. 231904(1–3).

71. G. F. Wang and X. Q. Feng, Effects of surface stresses on contact problems at nano scale, Journal of Applied Physics, 2007, Vol. 101, No. 1, pp. 013510(1–6).

72. G. F. Wang, X. Q. Feng and S. W. Yu, Interface effects on the diffraction of plane compressional waves by a nanosized spherical inclusion, Journal of Applied Physics, 2007, Vol. 102, No. 4, pp. 043533(1–6).

73. G. F. Wang, X. Q. Feng and S. W. Yu, Surface buckling of a bending microbeam due to surface elasticity, Europhysics Letters, 2007, Vol. 77, No. 4, pp. 44002(1–4).

74. H. M. Xu, X. F. Yao, X. Q. Feng and H. Y. Yeh, Anti-plane Yoffe moving crack problem in isotropic functionally graded materials. Journal of Reinforced Plastics and Composites, 2007, Vol. 26, No. 2, pp. 127–137.

75. H. P. Zhao and X. Q. Feng, Variability in mechanical properties of Bombyx mori silk, Materials Science and Engineering C - Biomimetic and Supramolecular Systems, 2007, Vol. 27, No. 4, pp. 675–683.

76. H. P. Zhao, X. Q. Feng and H. J. Gao, Ultrasonic technique for extracting nanofibers from nature, Applied Physics Letters, 2007, Vol. 90, No. 7, pp. 073112(1–2).

77. H. P. Zhao, X. Q. Feng, W. Z. Cui and F. Z. Zou, Mechanical properties of silkworm cocoon pelades, Engineering Fracture Mechanics, 2007, Vol. 74, No. 12, pp. 1953–1962.

78. J. L. Liu and X. Q. Feng, Capillary adhesion of microbeams: Finite deformation analyses, Chinese Physics Letters, 2007, Vol. 24, No. 8, pp. 2349–2352.

79. J. L. Liu, R. Xia, B. W. Li, X. Q. Feng, Directional motion of droplets in a conical tube or on a conical fiber. Chinese Physics Letters, 2007, Vol. 24, No. 11, pp. 3210–3213.

80. J. L. Liu, X. Q. Feng and G. F. Wang, Buoyant force and sinking conditions of a hydrophobic thin rod floating on water, Physical Review E, 2007, Vol. 76, No. 6, pp. 066103(1–9).

81. J. L. Liu, X. Q. Feng, G. F. Wang and S. W. Yu, Mechanisms of superhydrophobicity on hydrophilic substrates, Journal of Physics: Condensed Matters, 2007, Vol. 19, No. 35, pp. 356002(1–12).

82. J. L. Liu, X. Q. Feng, R. Xia and H. P. Zhao, Hierarchical capillary adhesion of microcantilevers or hairs, Journal of Physics D: Applied Physics, 2007, Vol. 40, No. 18, pp. 5564–5570.

83. L. Yu, S. W. Yu and X. Q. Feng, A phenomenological constitutive model of ferroelectrics with gradual domain switching, Key Engineering Materials, 2007, Vol. 345–346, pp. 813–816.

84. L. Yu, S. W. Yu and X. Q. Feng, A simple constitutive model for ferroelectric ceramics with electrical/mechanical loading, Acta Mechanica Solida Sinica, 2007,

85. L. Yu, S. W. Yu and X. Q. Feng, Effects of electric fatigue on the butterfly curves of ferroelectric ceramics, Materials Science and Engineering A, 2007, Vol. 459, No. 1–2, pp. 273–277.

86. T. Hua, H. M. Xie, B. Pan, X. L. Qing, F. L. Dai and X. Q. Feng, A new micro-tensile system for measuring the mechanical properties of low-dimensional materials— Fibers and films, Polymer Testing, 2007, Vol. 26, No. 4, pp. 513–518.

87. W. G. Jiang, X. Q. Feng, G. Yang, Z. X. Yue and C. W. Nan, Influences of thickness and number of dielectric layers on residual stresses in micro multilayer ceramic capacitors, Journal of Applied Physics, 2007, Vol. 101, No. 10, pp. 104117(1–6).

88. W. Y. Yan, Q. P. Sun, L. M. Qian and X. Q. Feng, Analysis of spherical indentation of superelastic shape memory alloys, Int. J. Solids and Structures, 2007, Vol. 44, No. 1, pp. 1–17.

89. X. Q. Feng and Q. P. Sun, Shakedown analysis of shape memory alloy structures, Int. J. Plasticity, 2007, Vol. 23, No. 2, pp. 183–206.

90. X. Q. Feng, X. F. Gao, Z. N. Wu, L. Jiang and Q. S. Zheng, Superior water repellence ability of water strider’s legs with hierarchical structures: experiments and analysis, Langmuir, 2007, Vol. 23, No. 9, pp. 4892–4896.

91. Z. Qin, X. Q. Feng, J. Zou, Y. J. Yin and S.W. Yu, Superior flexibility of super carbon nanotubes: Molecular dynamics simulations. 2007, Applied Physics Letters, Vol. 91, No. 4, pp. 043108(1–3).

92. Z. X. Lu, S. W. Yu, X. Y. Wang and X. Q. Feng, Effect of interfacial slippage in peel test: theoretical model, European Physical Journal E, 2007, Vol. 23, No. 1, pp. 67–76.

93. Z. X. Lu, X. Y. Wang, S. W. Yu and X. Q. Feng, Effects of dislocation configuration, crack blunting and free surfaces on the triggering load of dislocation sources, Acta Mechanica Solida Sinica, 2007, Vol. 20, No. 2, pp. 103–109.

94. S. H. Ji, G. Chen, H. P. Zhao, X. Q. Feng and H. J. Shi, Effects of surface defects on rolling contact fatigue in 10Cr4Ni4Mo4V, Journal of Tsinghua University (Science and Technology), 2007, Vol. 47, No. 2, pp. 288–292.

95. J. Zou, B. H. Ji, X. Q. Feng and H. Gao, Self-assembly of single-walled carbon nanotubes into multi-walled carbon nanotubes in water: molecular dynamics simulations. Nano Letters, 2006, Vol. 6, No. 3, pp. 430–434.

96. J. Zou, B. H. Ji, X. Q. Feng and H. Gao, Molecular dynamics studies of carbon-water-carbon composite nanotubes. Small, 2006, Vol. 2, No. 11, pp. 1348–1355.

97. G. F. Wang, T. J. Wang and X. Q. Feng, Surface effects on the diffraction of plane compressional waves by a nanosized circular hole, Applied Physics Letters, 2006, Vol. 89, No. 23, pp. 231923(1–3).

98. W. Y. Yan, Q. P. Sun, X. Q. Feng and L. M. Qian, Determination of transformation stresses of shape memory alloy thin films - a method based on spherical indentation, Applied Physics Letters, 2006, Vol. 88, No. 24, pp. 241912(1–3).

99. Jian-Lin Liu, Xi-Qiao Feng, Shou-Wen Yu, Morphology of liquid drops and thin films on a solid surface with sinusoidal microstructures, Acta Mechanica Sinica, 2006, Vol. 22, No. 4, pp. 315–320.

100. J. Q. Zhang, S. W. Yu, X. Q. Feng and G. Y. Huang, Simulation of adatom clustering on a stepped surface. Philosophical Magazine Letters, 2006, Vol. 86, No. 5, pp. 277–289.

101. J. Song, H. Jiang, D. L. Shi, X. Q. Feng, Y. Huang, M. F. Yu and K. C. Hwang, Stone-Wales transformation: precursor of fracture in carbon nanotubes, International Journal of Mechanical Science, 2006, Vol. 48, No. 12, pp. 1464–1470.

102. L. Yu, S. W. Yu and X. Q. Feng, Constitutive relations of ferroelectric ceramics with electric fatigue effects, Chinese Physics Letters, 2006, Vol. 23, No. 7, pp. 1911–1914.

103. S. Q. Huang, Q. Y. Li, X. Q. Feng and S. W. Yu, Pattern instability of a soft elastic film under van der Waals forces. International Symposium on Macro-, Meso-, Micro- and Nano-Mechanics of Materials (MM2003), June 11–13, 2003, Hong Kong. Mechanics of Materials, 2006, Vol. 38, No. 1–2, pp. 88–99.

104. W. D. Shi, X. Q. Feng and H. Gao, Two dimensional model of vesicle adhesion on curved substrates, Acta Mechanica Sinica, 2006, Vol. 22, No. 6, pp. 529– 535.

105. X. Q. Feng and M. Xu, Solutions of stress intensity factors of subsurface cracks. International Workshop on Fracture of Materials: Moving Forwards, January 23–25, 2006, Sydney, Australia. Key Engineering Materials, 2006, Vol. 312, pp. 83–88.

106. H. M. Xu, X. F. Yao and X. Q. Feng, Dynamic stress intensity factor KⅢ and dynamic crack propagation characteristics of orthotropic material, Engineering Mechanics, 2006, Vol. 23, No. 10, pp. 68–72.

107. H. P. Zhao, X. Q. Feng, S. W. Yu, W. Z. Cui and F. Z. Zou, Mechanical properties of silkworm cocoons, Polymer, 2005, Vol. 46, No. 21, pp. 9192–9201.

108. D. L. Shi, X. Q. Feng, H. Q. Jiang, Y. Huang and K. C. Hwang, Multiscale analysis of fracture of carbon nanotubes embedded in composites, International Journal of Fracture, 2005, Vol. 134, No. 3–4, pp. 369–386.

109. L. Ma, X. Y. Wang, X. Q. Feng and S. W. Yu, Numerical analysis of interaction and coalescence of numerous microcracks, Engineering Fracture Mechanics, 2005, Vol. 72, No. 12, pp. 1841–1865.

110. S. W. Yu, N. N. Du, B. Gu and X. Q. Feng, Thermal effects on fracture of piezoelectric materials, Journal of Intelligent Material Systems and Structures, 2005, Vol. 16, No. 7–8, pp. 567–572.

111. H. P. Zhao, R. K. Y. Li, X. Q. Feng, Experimental investigation of interlaminar fracture toughness of CFRP composites with different stitching patterns, in: Proceedings of the Asian-Pacific Conference for Fracture and Strength 2004 (APCFS'04), October 6–8, 2004, South Korea. Key Engineering Materials, 2005, Vol. 297–300, pp. 189–194.

112. B. Chen, X. Q. Feng, J. H. Fan and X. L. Wu, Microstructure of the fiber/matrix of chafer cuticle, Advanced Materials Research, 2005, Vol. 9, pp. 15–20.

113. X. S. Wang, Y. H. Zhang, S. Y. Fu, X. Q. Feng, Effect of montmorillonite addition on mechanical characterizations of polyimide nanocomposite films, Acta Mechanica Solida Sinica, 2005, Vol. 18, No. 3, pp. 200–206.

114. S. W. Yu, X. Q. Feng and Y. Z. Yang, Review of the 11th International Conference on Fracture (ICF11) and research frontiers of fracture, Advances in Mechanics, 2005, Vol. 35, No. 4, pp. 611–613.

115. X. Q. Feng and Y. Huang, Mechanics of Smart-Cut? technology, Int. J. Solids and Structures, 2004, Vol. 41, No. 16–17, pp. 4299–4320.

116. X. Q. Feng, Q. H. Qin and S. W. Yu, Quasi-micromechanical damage model for quasi-brittle solids with interacting microcracks, Mechanics of Materials, 2004, Vol. 36, No. 3, pp. 261–273.

117. X. Q. Feng, Z. Tian, Y. H. Liu and S. W. Yu, Effective elastic and plastic properties of interpenetrating multiphase composites, Applied Composite Materials, 2004, Vol. 11, No. 1, pp. 33–55.

118. D. L. Shi, X. Q. Feng, Y. Huang, K. C. Hwang and H. Gao, The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites, Journal of Engineering Materials and Technology, 2004, Vol. 126, Nr. 3, pp. 250–257.

119. H. Jiang, X. Q. Feng, Y. Huang, K. C. Hwang, and P. D. Wu., Defect nucleation in carbon nanotubes under tension and torsion: Stone-Wales transformation, Computer Methods in Applied Mechanics and Engineering, 2004, Vol. 193, No. 31, pp. 3419–3429.

120. M. Xu and X. Q. Feng, Defect nucleation in SOI wafers due to hydrogen ion implantation, Theoretical and Applied Fracture Mechanics, 2004, Vol. 42, No. 3, pp. 295–301.

121. G. F. Wang, S. W. Yu and X. Q. Feng, A piezoelectric constitutive theory with torsion gradient effects, European Journal of Mechanics A - Solids, 2004, Vol. 23, No. 3, pp. 455–466.

122. Z. X. Lu, S. W. Yu and X. Q. Feng, A triggering criterion of dislocation sources under mode-I singular stresses, International Journal of Fracture, 2004, Vol. 126, No. 3, pp. 281–286.

123. X. Q. Feng, X. S. Wang, Frictional sliding of microcracks under compression, The Fifth International Conference on Fracture & Strength of Solids (FEOFS2003), Tohoko University, Sendai, Japan, October 20–22, 2003. Key Engineering Materials, 2004, Vol. 261–263, pp. 129–134.

124. X. S. Wang, X. Q. Feng and X. W. Guo, Failure behavior of anodized coating-magnesium alloy substrate structures, The Fifth International Conference on Fracture & Strength of Solids (FEOFS2003), Tohoko University, Sendai, Japan, October 20–22, 2003. Key Engineering Materials, 2004, Vol. 261–263, pp. 363–368.

125. D. L. Shi, X. Q. Feng, Y. Huang and K. C. Hwang, Critical evaluation of the stiffening effect of carbon nanotubes in composites, The Fifth International Conference on Fracture & Strength of Solids (FEOFS2003), Tohoko University, Sendai, Japan, October 20–22, 2003. Key Engineering Materials, 2004, Vol. 261–263, pp. 1487–1492.

126. X. Q. Feng, J. Y. Li and S. W. Yu, A simple method for calculating interaction of numerous microcracks and its applications, Int. J. Solids and Structures, 2003, Vol. 40, No. 2, pp. 447–464.

127. X. Q. Feng, J. Y. Li, L. Ma and S. W. Yu, Analysis of interaction of numerous microcracks, Computational Materials Science, 2003, Vol. 28, No. 3–4, pp. 454–461.

128. X. Q. Feng, Yiu-Wing Mai, and Q. H. Qin, A micromechanical model for interpenetrating multiphase composites, Computational Materials Science, 2003, Vol. 28, No. 3–4, pp. 486–493.

129. G. F. Wang, X. Q. Feng, S. W. Yu and C. W. Nan, Interface effects on effective elastic moduli of nanocrystalline materials, Materials Science and Engineering A, 2003, Vol. 363, No. 1–2, pp. 1–8.

130. H. X. Li, Y. H. Liu, X. Q. Feng and Z. Z. Cen, Limit analysis of ductile composites based on homogenization theory, Proceedings of the Royal Society of London A, 2003, Vol. 459, No. 2031, pp. 659–675.

131. X. S. Wang and X. Q. Feng, Electrochemically synthesized polythiophene films with self-organized microstructure, Polymer Engineering and Science, 2003, Vol. 43, No. 4, pp. 919–922.

132. L. Ma, X. Q. Feng, K. W. Gao, and S. W. Yu, Elastic and plastic analyses of functionally graded elements, Materials Science Forum, 2003, Vol. 423–425, pp. 731–736.

133. G. F. Wang, S. W. Yu and X. Q. Feng, A continuum damage theory with rotation gradients, Int. J. Damage Mechanics, 2003, Vol. 12, No. 3, pp. 179–192.

134. X. S. Wang and X. Q. Feng, Effects of thickness on mechanical properties of conducting polythiophene films, Journal of Materials Science Letters, 2002, Vol. 21, No. 8, pp. 715–717.

135. G. F. Wang, X. Q. Feng and S. W. Yu, Effective elastic moduli and interface effects of nanocrystalline materials, Chinese Science Bulletin (Chinese Edition), 2002, Vol. 47, No. 14, pp. 1062–1065. See also: Chinese Science Bulletin (English Edition), 2002, Vol. 47, No. 17, pp. 1493–1496.

136. Z. R. Chen, S. W. Yu, X. Q. Feng and M. Lu, A micromechanics model for estimating thermoelastic properties of layered media, Composite Science and Technology, 2002, Vol. 62, No. 3, pp. 441–449.

137. Z. R. Chen, S. W. Yu and X. Q. Feng, Evaluation of thermoelastic properties of three-dimensional orthogonal woven composites, Composite Part B: Engineering, 2002, Vol. 33, No. 3, pp. 241–251.

138. B. Gu, S. W. Yu and X. Q. Feng, Transient response of an interface crack between dissimilar piezoelectric layers under mechanical impacts, International Journal of Solids and Structures, 2002, Vol. 39, No. 7, pp. 1743–1756.

139. B. Gu, S. W. Yu and X. Q. Feng, Elastic wave scattering by an interface crack between a piezoelectric layer and an elastic substrate. International Journal of Fracture, 2002, Vol. 116, No. 2, pp. L29–34.

140. B. Gu, S. W. Yu and X. Q. Feng, Transient response of an insulating crack between dissimilar piezoelectric layers under mechanical and electrical impacts. Archive of Applied Mechanics, 2002, Vol. 72, No. 8, pp. 615–629.

141. B. Gu, S. W. Yu, X. Q. Feng and Yiu-Wing Mai, Scattering of Love waves by an interface crack between a piezoelectric layer and an elastic substrate, Acta Mechanica Solida Sinica, 2002, Vol. 15, No. 2, pp. 111–118.

142. C. W. Nan, M. Li, X. Q. Feng and S. W. Yu, Possible giant magnetoelectric effect of ferromagnetic rare-earth-iron-alloys-filled ferroelectric polymers, Applied Physics Letters, 2001, Vol. 78, No. 17, pp. 2527-2529.

143. X. Q. Feng, On estimation methods for effective moduli of microcracked solids, Archive of Applied Mechanics, 2001, Vol. 71, No. 8, pp. 537–548.

144. X. Q. Feng, Cohesive damage zone model for a circular crack in a quasi-brittle solid, ZAMM, 2001, Vol. 81, No. 1, pp. 65–68.

145. X. Q. Feng and S. W. Yu, A simplified calculation method for effective moduli of microcracked solids, Acta Mechanica Sinica, 2001, Vol. 33, No. 1, pp. 102–108 (in Chinese).

146. X. Q. Feng, Effective elastic moduli of polymer layered-silicate nanocomposites, Chinese Science Bulletin (Chinese Edition), 2001, Vol. 46, No. 4, pp. 348–351. See also: Chinese Science Bulletin (English Edition), 2001, Vol. 46, No. 13, pp. 1130–1133.

147. X. Q. Feng and S. W. Yu, Quasi-micromechanical constitutive theory for brittle damaged materials, Acta Mechanica Solida Sinica, 2001, Vol. 14, No. 3, pp. 200–207.

148. G. F. Wang, S. W. Yu and X. Q. Feng, Boundary layers near interfaces between crystals with strain gradient effects, Mechanics Research Communications, 2001, Vol. 28, No. 1, pp. 87–95.

149. G. F. Wang, S. W. Yu and X. Q. Feng, Strain gradient effect near interface of coaxial cylinders in torsion, Theoretical and Applied Fracture Mechanics, 2001, Vol. 36, No. 3, pp. 195–202.

150. X. Q. Feng and S. W. Yu, Effects of reinforcement shape on the effective moduli of composites, Part I, Journal of Tsinghua University, 2001, Vol. 41, No. 11, pp. 8–10 (in Chinese).

151. X. Q. Feng and S. W. Yu, Effects of reinforcement shape on the effective moduli of composites, Part II, Journal of Tsinghua University, 2001, Vol. 41, No. 11, pp. 11–14 (in Chinese).

152. X. R. Niu, S. W. Yu and X. Q. Feng, Finite element simulation of thermally-mismatched interfaces, J. Tsinghua University, 2001, Vol. 41, No. 4/5, pp. 104–107 (in Chinese).

153. G. F. Wang, S. W. Yu and X. Q. Feng, Boundary layers near interfaces under torsion, Journal of Tsinghua University, 2001, Vol. 41, No. 11, pp. 1–3 (in Chinese).

154. H. X. Li, Y. H. Liu, X. Q. Feng and Z. Z. Cen, Upper bound analysis on plastic limit loads of orthotropic structures, J. Tsinghua University, 2001, Vol. 41, No. 8, pp. 71–74 (in Chinese).

155. H. X. Li, Y. H. Liu, X. Q. Feng and Z. Z. Cen, Micro/macromechanical plastic limit analyses of composite materials and structures, Acta Mechanica Solida Sinica, 2001, Vol. 14, No. 4, pp. 323–333.

156. X. Q. Feng and D. Gross, Three-dimensional micromechanical model for quasi-brittle solids with residual strains under tension, Int. J. Damage Mechanics, 2000, Vol. 9, No. 1, pp. 79–110.

157. X. Q. Feng and D. Gross, An approximate scheme for considering effects of microcrack interaction on overall constitutive relation of brittle solids under complex loading, Acta Mechanica, 2000, Vol. 139, No. 1–4, pp. 143–159.

158. X. Q. Feng and S. W. Yu, Estimate of effective elastic moduli with microcrack interaction effects, Theoretical and Applied Fracture Mechanics, 2000, Vol. 34, No. 3, pp. 225–233.

159. X. Q. Feng and D. Gross, On the coalescence of collinear cracks in quasi-brittle materials, Engineering Fracture Mechanics, 2000, Vol. 65, No. 5, pp. 511–524.

160. X. Q. Feng, New estimates of effective moduli of microcracked materials, Key Engineering Materials, 2000, Vol. 183–187, pp. 667–672.

161. G. F. Wang, S. W. Yu and X. Q. Feng, An analysis of interface boundary layers based on the couple stress theory, Acta Mechanica Solida Sinica, 2000, Vol. 13, No. 4, pp. 299–305.

162. X. Q. Feng and D. Gross, A global/local shakedown analysis method of elastoplastic cracked structures, Engineering Fracture Mechanics, 1999, Vol. 63, No. 2, pp. 179–192.

163. X. Q. Feng and D. Gross, Micromechanical analysis of microcrack-induced residual strains in quasi-brittle solids, Computational Materials Science, 1999, Vol. 16, pp. 362–371.

164. X. Q. Feng and D. Gross, Effects of damage on effective properties of piezoelectric composites, Journal de Physique IV, 1999, Vol. 9, No. 9, pp. 197–206.

165. S. W. Yu, X. Q. Feng and Q. H. Qin, On several problems of macro/micro failure mechanics, Key Engineering Materials, 1998, Vol. 145–149, pp. 51–60

166. X. Q. Feng and S. Y. He, Safety analysis of the reactor pressure vessel of NHR-200, Technische Mechanik, 1998, Vol. 18, No. 4, pp. 277–284.

167. X. Q. Feng and S. Y. He, LBB analysis of pressurized piping and vessels in nuclear reactors, Advances in Mechanics, 1998, Vol. 28, No. 2, pp. 198–217, (in Chinese).

168. X. Q. Feng and X. S. Liu, On shakedown of three-dimensional elastoplastic strain-hardening structures, Int. J. Plasticity, 1996, Vol. 12, No. 10, pp. 1241–1256.

169. X. Q. Feng and S. W. Yu, Analysis of damage localization at the crack tip in a brittle damaged material, Engineering Fracture Mechanics, 1996, Vol. 53, No. 2, pp. 169– 177.

170. X. Q. Feng and S. W. Yu, Micromechanical modeling of tensile response of elastic-brittle materials, Int. J. Solids and Structures, 1995, Vol. 32, No. 22, pp. 3359–3374.

171. X. Q. Feng and S. W. Yu, Damage and shakedown analysis of structures with strain-hardening, Int. J. Plasticity, 1995, Vol. 11, No. 3, pp. 237–249.

172. S. W. Yu and X. Q. Feng, A micromechanics-based model for microcrack-weakened brittle solids, Mechanics of Materials, 1995, Vol. 20, No. 1, pp. 59–76.

173. X. Q. Feng and S. W. Yu, Micromechanical modeling of strain-softening in microcrack-weakened quasi-brittle materials, Acta Mechanica Solida Sinica, 1995, Vol. 8, No. 2, pp. 121–132.

174. X. Q. Feng and S. W. Yu, An upper bound on damage of elastic-plastic structures at shakedown, Int. J. Damage Mechanics, 1994, Vol. 3, No. 3, pp. 277–289.

Baidu
sogou
Baidu
sogou